Applied professional course
Industrial and Logistics Estate Planning
Plan an industrial or logistics estate around vehicle movement, plot flexibility, servicing and buffers to neighbouring uses.
Written teaching content: available for review
Video lessons have not yet been recorded. Written teaching content may be available for review below.
Written teaching content only. This course is not yet available: it has not been professionally reviewed, no lesson is recorded, and enrolment, payment, certificates, downloads and protected access are all disabled.
Review Written Course ContentReading only. This is not enrolment, booking, purchase, account access, a download or protected learning access.
- Written content: Available for review
- Video lessons: Not recorded
- Professional review: Not yet completed
- Enrolment: Not available
- Payment: Disabled
- Certificates: Disabled
- Downloads: Disabled
- Protected access: Disabled
Written course content
Client-style brief
A landowner controls 24 hectares beside a strategic road junction and wants a planning-led estate concept for a mixed industrial and logistics park: a range of unit sizes, credible heavy-vehicle circulation, service yards that actually work, drainage capacity, landscape screening to a residential edge, and a phasing plan that lets early units be occupied while later plots remain undeveloped.
Professional scenario
Synthetic 24-hectare site with a single junction access opportunity, a level change across the northern third, a watercourse along the eastern boundary and housing beyond a hedgerow to the south.
Planning problem
Industrial layouts often fail on vehicle geometry, yard depth and drainage land, and are then redrawn late at heavy cost. The professional problem is to plan plots around real operational requirements and to demonstrate that the estate works before the layout is fixed.
Learning objectives
- Translate operational requirements into plot dimensions and yard geometry.
- Design an estate road network that works for the design vehicle.
- Plan drainage, levels and earthworks as part of the layout, not after it.
- Design a landscape and amenity edge that mitigates a residential interface.
- Produce a phased estate framework with plot schedule and floorspace yield.
Modules and lessons
0 of 9 lessons open
Module 1
Module 1 — Operational requirements and plot planning
Start from how the estate will be used, not from how it draws.
Small trade units, mid-box industrial, large distribution and last-mile formats; how clear height, dock ratio, yard depth, staff parking and HGV parking differ, and why one plot depth cannot serve all of them.
Practical exercise: Build a requirement schedule for four typologies with footprint, yard depth and parking demand.
Checkpoint: Each typology has a stated minimum plot depth derived from its yard requirement.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Site coverage ratios, the relationship between plot depth and yard function, avoiding unusable residual plots, and testing plot flexibility for future subdivision or amalgamation.
Practical exercise: Produce a plot structure for the site with sizes, coverage ratios and a flexibility note per plot.
Checkpoint: No plot is drawn that cannot accommodate at least one stated typology.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Choosing the design vehicle, junction capacity considerations at concept level, separating HGV from staff and visitor movement, and the geometry implications for every internal corner.
Practical exercise: Set the access strategy and demonstrate a design-vehicle swept path at three critical points.
Checkpoint: Each critical corner is tested rather than assumed adequate.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Example data: Ideeplan-owned unit typology teaching dataset with indicative footprints, yard depths, dock and parking ratios.
Module output: Requirement schedule and a plot structure diagram.
Module 2
Module 2 — Circulation, levels and drainage
Make the estate physically work across the site's topography.
Spine, secondary and plot access roads; turning heads and their real footprint; refuse, fire and emergency access; and how a loop can outperform a series of dead ends.
Practical exercise: Draw the estate road hierarchy with turning provision and mark every servicing route.
Checkpoint: No plot depends on a reversing manoeuvre onto the spine road.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Setting plot platforms across a level change, gradient limits for yards and roads, retaining requirements, and the cost logic of a balanced cut and fill.
Practical exercise: Produce a platform levels strategy with an indicative cut-and-fill balance statement.
Checkpoint: Yard gradients stay within stated operational limits and the earthworks balance is quantified.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Impermeable area from large roofs and yards, attenuation land requirement, outfall constraints, treatment for yard runoff, and reserving drainage land at plot planning stage.
Practical exercise: Calculate indicative attenuation land for the estate and reserve it on the layout.
Checkpoint: Attenuation land is located, sized and connected to a credible outfall.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Example data: Synthetic contour set, watercourse alignment and Ideeplan-owned drainage teaching parameters.
Module output: Estate circulation plan with levels strategy and drainage reservation.
Module 3
Module 3 — Edges, phasing and the estate framework
Resolve the residential interface and set out a deliverable framework.
Buffer depth that actually mitigates, planting that works in the first five years, lighting and noise-sensitive layout decisions, boundary treatment and screening of yards rather than of buildings only.
Practical exercise: Design the southern interface with a sectioned buffer and a written mitigation rationale.
Checkpoint: The buffer is drawn in section, not described in prose alone.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Delivering access, drainage and spine road in phase one, keeping later plots serviceable, temporary conditions for undeveloped land, and phase boundaries that can be built independently.
Practical exercise: Produce a three-phase plan with the infrastructure required to open each phase.
Checkpoint: Each phase is independently occupiable with its own access, drainage and servicing.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Assembling the plot schedule, calculating indicative floorspace and job-density style metrics with stated caveats, and packaging a framework that guides later detailed applications.
Practical exercise: Produce the plot schedule and floorspace summary and assemble the framework document.
Checkpoint: Schedule areas reconcile with the drawn layout to within a stated tolerance.
Video lesson: Not recorded — written lesson above
Resource file not yet available. The written instructions on this page are complete and can be followed without any download.
Example data: Synthetic residential edge context and an Ideeplan-owned framework document structure.
Module output: Industrial estate development framework with phasing and plot schedule.
Project brief
A synthetic 24-hectare employment site beside a strategic junction, with a level change, an eastern watercourse and a southern residential edge.
Your role: Planning lead preparing an estate development framework for a landowner.
Information available
- Synthetic boundary, contour set and watercourse alignment.
- Ideeplan-owned unit typology and yard requirement teaching dataset.
- Drainage teaching parameters and residential context description.
- Framework document teaching structure.
Required analysis
- Typology requirement schedule and plot sizing.
- Design-vehicle circulation testing.
- Levels, platform and earthworks balance.
- Drainage land requirement and outfall logic.
- Interface mitigation and phasing sequencing.
Required outputs
- Requirement schedule and plot structure diagram.
- Estate circulation plan with swept-path evidence.
- Levels and drainage strategy plans.
- Interface section and mitigation rationale.
- Three-phase delivery plan.
- Plot schedule and floorspace summary.
Presentation standard: Consistent scale and north point, dimensioned critical geometry, levels annotated, drainage land shown as an area, and all yield figures marked indicative.
Marking criteria
- Operational realism: Every plot can accommodate a stated typology with a working yard.
- Vehicle geometry: Critical corners and turning provision are demonstrated, not assumed.
- Levels and drainage: Platforms, gradients and attenuation land are quantified and located.
- Interface quality: The residential edge is mitigated with a sectioned, justified buffer.
- Deliverability: Each phase is independently serviceable and occupiable.
Quality-assurance checklist
- Plot schedule areas reconcile with the drawn layout.
- Every yard depth traces to a typology requirement.
- Swept paths are shown at all critical corners.
- Attenuation land is drawn, sized and connected to an outfall.
- Local highway, drainage, noise and lighting standards must be confirmed with the relevant authority.
Common mistakes and correction tasks
- Drawing plots at a uniform depth regardless of typology. Correction: Re-derive plot depths from yard requirements per typology and re-cut the plot structure.
- Assuming a turning head is adequate without testing it. Correction: Run the design-vehicle swept path and resize the head to the tested geometry.
- Adding drainage attenuation after the layout is fixed. Correction: Calculate the land requirement from impermeable area and reserve it within the plot structure.
- Screening the residential edge with a thin planting strip. Correction: Draw the buffer in section, set a depth that mitigates yard activity and state establishment time.
Enrolment status
Enrolment is not currently available. This course is still undergoing content, media and professional review.
Register Interest is an expression of interest only. It works without an account, creates no enrolment, no reserved place and no payment order.
Protected lessons, approved videos and approved resource files are not accessible. No protected file URL, signed link or download entitlement is created.
Payments are disabled. No price, checkout, payment provider, payment order or paid-course claim exists in the Academy.
Outstanding before enrolment could open
- Outstanding — Professional content review is complete
- Outstanding — Required videos recorded, reviewed and approved, or the course approved as written-only
- Outstanding — Required practical resources approved and available
- Outstanding — Learner terms approved
- Outstanding — Privacy and data-handling requirements approved
- Outstanding — Course availability explicitly enabled by an authorised administrator
- Outstanding — Payment and refund terms approved (paid courses)
- Outstanding — Payment provider configuration complete (where payment is required)
- Outstanding — Authentication email delivery configured and tested
- Outstanding — Protected content access tested
- Outstanding — Approved delivery and support process in place
Progress, assessment and certificates
Submission access is not currently available
Lesson and course progress tracking is not active. No progress record, completion percentage or completed lesson exists for any account, and no course can record progress until enrolment opens.
Practical assessments cannot be submitted. Submission access is not currently available: there is no active enrolment, no upload configuration and no authorised reviewer workflow in operation.
No assessment has been marked, reviewed, corrected or passed. Reviewer feedback, correction tasks and pass decisions are made by an authorised human reviewer and none exists.
No certificate is issued, approved or pending. A future Academy certificate would be a course-completion certificate only — not a professional licence, statutory qualification, accreditation or government-recognised award.
Certificate verification is disabled until a certificate is genuinely issued. No verification result is produced for any reference.
Assessment formats planned for the Academy
Written briefs, required deliverables and marking criteria are published inside the course content above for open review. None of them can be submitted or marked at present.
- Practical planning task
- GIS mapping exercise
- Site-appraisal task
- Feasibility assessment
- CAD or drawing task
- Revit coordination task
- Planning-report task
- Policy-assessment task
- Transport or access analysis
- Environmental or green-infrastructure exercise
- Final course project
Outstanding before completion or a certificate could exist
- Outstanding — Learner identity verified by an authorised member of staff
- Outstanding — Learner holds a valid active or completed enrolment
- Outstanding — All required lessons completed
- Outstanding — All required practical assessments passed
- Outstanding — A recorded assessment decision exists for every required task
- Outstanding — All requested corrections completed
- Outstanding — Course content professionally reviewed and signed off
- Outstanding — Authorised reviewer has approved completion
- Outstanding — Course certificate policy approved
- Outstanding — Certificate wording approved by Ideeplan Consult
- Outstanding — Course is officially available
- Outstanding — Unique certificate numbering and a secure verification route configured
Practical resources
Resources for this course
13 resource records · 13 with a written preview · 0 with a file under preparation · Download access not yet enabled.
All demonstration material is synthetic, publicly licensed or owned by Ideeplan Consult and is labelled as demonstration material. No confidential client file, personal information, private agency document or unreleased project drawing is used.
- Written preview available — downloadable file not yet available
Practical project brief
Sets the professional situation, the role the learner takes and what must be produced.
- Resource type
- Brief
- Format
- Written brief shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — One brief governs the whole course: every lesson exercise contributes to the same final deliverable.
- Access
- No account required — written preview is public
- A synthetic 24-hectare employment site beside a strategic junction, with a level change, an eastern watercourse and a southern residential edge.
- Your role: Planning lead preparing an estate development framework for a landowner.
- Available information: Synthetic boundary, contour set and watercourse alignment.
- Available information: Ideeplan-owned unit typology and yard requirement teaching dataset.
- Available information: Drainage teaching parameters and residential context description.
- Available information: Framework document teaching structure.
- Required analysis: Typology requirement schedule and plot sizing.
- Required analysis: Design-vehicle circulation testing.
- Required analysis: Levels, platform and earthworks balance.
- Required analysis: Drainage land requirement and outfall logic.
- Required analysis: Interface mitigation and phasing sequencing.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Client-style instruction and problem statement
Gives the learner the instruction as a practitioner would receive it, and names the problem to be solved.
- Resource type
- Brief
- Format
- Written statement shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — Scenario framing applies to every lesson in the course.
- Access
- No account required — written preview is public
Synthetic 24-hectare site with a single junction access opportunity, a level change across the northern third, a watercourse along the eastern boundary and housing beyond a hedgerow to the south.
Industrial layouts often fail on vehicle geometry, yard depth and drainage land, and are then redrawn late at heavy cost. The professional problem is to plan plots around real operational requirements and to demonstrate that the estate works before the layout is fixed.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Module 1 learner worksheet — Module 1 — Operational requirements and plot planning
Lists the practical steps the learner carries out in this module, in order.
- Resource type
- Worksheet
- Format
- Written worksheet shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Requirement schedule and a plot structure diagram.
- Lessons supported
- 3 — Supports the 3 lessons in module 1, which build one shared output.
- Access
- No account required — written preview is public
- Unit typologies and occupier requirements — Build a requirement schedule for four typologies with footprint, yard depth and parking demand.
- Plot sizing, ratios and developable structure — Produce a plot structure for the site with sizes, coverage ratios and a flexibility note per plot.
- Access strategy and the design vehicle — Set the access strategy and demonstrate a design-vehicle swept path at three critical points.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Module 2 learner worksheet — Module 2 — Circulation, levels and drainage
Lists the practical steps the learner carries out in this module, in order.
- Resource type
- Worksheet
- Format
- Written worksheet shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Estate circulation plan with levels strategy and drainage reservation.
- Lessons supported
- 3 — Supports the 3 lessons in module 2, which build one shared output.
- Access
- No account required — written preview is public
- Estate road hierarchy and servicing — Draw the estate road hierarchy with turning provision and mark every servicing route.
- Levels, platforms and earthworks balance — Produce a platform levels strategy with an indicative cut-and-fill balance statement.
- Drainage capacity and land take — Calculate indicative attenuation land for the estate and reserve it on the layout.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Module 3 learner worksheet — Module 3 — Edges, phasing and the estate framework
Lists the practical steps the learner carries out in this module, in order.
- Resource type
- Worksheet
- Format
- Written worksheet shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial estate development framework with phasing and plot schedule.
- Lessons supported
- 3 — Supports the 3 lessons in module 3, which build one shared output.
- Access
- No account required — written preview is public
- Residential interface, landscape and amenity — Design the southern interface with a sectioned buffer and a written mitigation rationale.
- Phasing and infrastructure sequencing — Produce a three-phase plan with the infrastructure required to open each phase.
- Plot schedule, floorspace yield and the framework document — Produce the plot schedule and floorspace summary and assemble the framework document.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Task checklist
Confirms every required piece of work has been produced before submission.
- Resource type
- Checklist
- Format
- Written checklist shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — A single task checklist tracks progress across all modules.
- Access
- No account required — written preview is public
- Requirement schedule and plot structure diagram.
- Estate circulation plan with swept-path evidence.
- Levels and drainage strategy plans.
- Interface section and mitigation rationale.
- Three-phase delivery plan.
- Plot schedule and floorspace summary.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Example data and drawing base
Ideeplan-owned unit typology teaching dataset with indicative footprints, yard depths, dock and parking ratios. GIS exercises are planned around plain, checkable formats: CSV and clearly labelled local-grid JSON on the named grid IDP-LOCAL-GRID. GeoJSON is not used for local-grid training data because the format asserts WGS 84 degrees. No QGIS project file, GeoPackage or raster file is claimed.
- Resource type
- GIS exercise pack
- Format
- CSV and local-grid JSON (planned) — no GeoJSON, QGIS project, GeoPackage or raster file is claimed
- Status
- Planned
- Data classification
- Synthetic demonstration data
- Licence or ownership
- Synthetic demonstration material prepared by Ideeplan Consult. No client file, personal information, private agency document or unreleased project drawing is used.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — One demonstration data base is used by every lesson so results stay comparable.
- Access
- No account required — written preview is public
Demonstration data item What it contains and how it is used Data ownership and licence Synthetic training data prepared and owned by Ideeplan Consult. It is fictional: it is not a real client project, a real site or a real location, and it must not be presented as one. Free to study on this page; redistribution is not permitted. Module 1 input — Module 1 — Operational requirements and plot planning Ideeplan-owned unit typology teaching dataset with indicative footprints, yard depths, dock and parking ratios. Module 2 input — Module 2 — Circulation, levels and drainage Synthetic contour set, watercourse alignment and Ideeplan-owned drainage teaching parameters. Module 3 input — Module 3 — Edges, phasing and the estate framework Synthetic residential edge context and an Ideeplan-owned framework document structure. Lawful sourcing where real data is substituted Where a learner substitutes real data, use only openly licensed or lawfully obtained sources, record the publisher, dataset title, version and access date, and cite them in the final deliverable. Do not use restricted, confidential or personal data. Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Analysis and calculation template
Structures the analysis so assumptions are visible and checkable. Any figures used in a template are teaching assumptions, not market evidence. Local costs, policies, standards and valuation assumptions must be independently confirmed before any of this is applied to a real project.
- Resource type
- Suitability matrix
- Format
- CSV matrix (planned)
- Status
- Planned
- Data classification
- Synthetic demonstration data
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — The same analysis structure is completed progressively through the course.
- Access
- No account required — written preview is public
- Record every assumption on its own labelled row, with the source or reason beside it.
- Module 1 working section — Requirement schedule and a plot structure diagram.
- Module 2 working section — Estate circulation plan with levels strategy and drainage reservation.
- Module 3 working section — Industrial estate development framework with phasing and plot schedule.
- Required output carried into the analysis — Requirement schedule and plot structure diagram.
- Required output carried into the analysis — Estate circulation plan with swept-path evidence.
- Required output carried into the analysis — Levels and drainage strategy plans.
- Required output carried into the analysis — Interface section and mitigation rationale.
- Required output carried into the analysis — Three-phase delivery plan.
- Required output carried into the analysis — Plot schedule and floorspace summary.
- Check row: totals, units and areas reconcile before the result is carried into the deliverable.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Final deliverable template
Sets the expected structure and presentation standard for Industrial and logistics estate development framework with plot schedule and phasing plan.
- Resource type
- Site plan base
- Format
- PDF and DXF (planned)
- Status
- Planned
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — The final deliverable draws on every module output.
- Access
- No account required — written preview is public
- Final named deliverable — Industrial and logistics estate development framework with plot schedule and phasing plan
- Section 1 — Requirement schedule and a plot structure diagram.
- Section 2 — Estate circulation plan with levels strategy and drainage reservation.
- Section 3 — Industrial estate development framework with phasing and plot schedule.
- Must be present — Requirement schedule and plot structure diagram.
- Must be present — Estate circulation plan with swept-path evidence.
- Must be present — Levels and drainage strategy plans.
- Must be present — Interface section and mitigation rationale.
- Must be present — Three-phase delivery plan.
- Must be present — Plot schedule and floorspace summary.
- Presentation and submission standard — Consistent scale and north point, dimensioned critical geometry, levels annotated, drainage land shown as an area, and all yield figures marked indicative.
- Sources and citations: list every dataset, publisher, version and access date used, and state clearly where synthetic Ideeplan training data was used.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Quality-control checklist
Professional checks to run before the work is treated as finished.
- Resource type
- Checklist
- Format
- Written checklist shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — Quality control is applied to the whole submission, not to a single lesson.
- Access
- No account required — written preview is public
- Plot schedule areas reconcile with the drawn layout.
- Every yard depth traces to a typology requirement.
- Swept paths are shown at all critical corners.
- Attenuation land is drawn, sized and connected to an outfall.
- Local highway, drainage, noise and lighting standards must be confirmed with the relevant authority.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Marking and review rubric
States what a satisfactory professional standard looks like for each criterion.
- Resource type
- Marking rubric
- Format
- Written rubric shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — One rubric reviews the final deliverable produced across all modules.
- Access
- No account required — written preview is public
Criterion Satisfactory standard Operational realism Every plot can accommodate a stated typology with a working yard. Vehicle geometry Critical corners and turning provision are demonstrated, not assumed. Levels and drainage Platforms, gradients and attenuation land are quantified and located. Interface quality The residential edge is mitigated with a sectioned, justified buffer. Deliverability Each phase is independently serviceable and occupiable. Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Correction-task sheet
Common professional mistakes and the correction the learner practises.
- Resource type
- Correction-task sheet
- Format
- Written task sheet shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — Correction tasks address mistakes that can appear anywhere in the course.
- Access
- No account required — written preview is public
- Drawing plots at a uniform depth regardless of typology. — Re-derive plot depths from yard requirements per typology and re-cut the plot structure.
- Assuming a turning head is adequate without testing it. — Run the design-vehicle swept path and resize the head to the tested geometry.
- Adding drainage attenuation after the layout is fixed. — Calculate the land requirement from impermeable area and reserve it within the plot structure.
- Screening the residential edge with a thin planting strip. — Draw the buffer in section, set a depth that mitigates yard activity and state establishment time.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
- Written preview available — downloadable file not yet available
Submission guidance
How the finished work should be assembled and presented for professional review.
- Resource type
- Checklist
- Format
- Written guidance shown on this page
- Status
- Draft
- Data classification
- Ideeplan-owned demonstration material
- Licence or ownership
- Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
- Related deliverable
- Industrial and logistics estate development framework with plot schedule and phasing plan
- Lessons supported
- 9 — Submission guidance covers the single final deliverable.
- Access
- No account required — written preview is public
Consistent scale and north point, dimensioned critical geometry, levels annotated, drainage land shown as an area, and all yield figures marked indicative.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
Media status
Video lessons for this course
- Video lessons
- Video lesson: Not recorded — authentic professional recording required.
- Narration
- Professional narration — planned, not produced
- Captions
- Not yet produced
- Transcript
- Not yet produced
- Software demonstration
- Genuine screen capture from the real application only — no mockup, simulated interface or AI-generated screen.
- Software version and operating system
- No software version is published until it has been read from the actual recorded session. Until then the version reads “To be stated from the recorded session”.
- Production plan
- Prepared for professional review
- Enrolment, payment and downloads
- Disabled
Video lesson: Not recorded — authentic professional recording required. The written lesson on this page is complete and can be read in full without a video, an account, enrolment or payment.
Authentic software screen capture only — non-negotiable standard
Applies to every software demonstrated in the Academy, including AutoCAD, QGIS, Revit, ArcGIS, SketchUp, Lumion, Civil 3D, Rhino and any other software used. The final video must accurately represent what a learner sees when using the stated software version.
- Every demonstration is a genuine screen recording or screenshot captured from the actual installed software being taught.
- The exact software name, version, operating system and relevant workspace are stated on screen and in the lesson notes, as read from the recorded session.
- The real interface is shown: menus, panels, toolbars, properties, layer controls, settings and the command line or log.
- The real cursor, tool selection, commands, settings and the resulting output are visible.
- Capture is 16:9 and readable at 720p, with clear, unhurried cursor movement; the screen stays clear enough for learners to follow.
- The view zooms in whenever text, settings, coordinates or field values would otherwise be hard to read.
- The exact command, menu path or tool name is shown as it appears in the software.
- Useful keyboard shortcuts are shown alongside the menu path, never instead of it.
- Differences between software versions or operating systems are stated wherever the interface may display differently.
- Steps are numbered on screen, with callouts pointing at the actual control being used.
- Any annotation is added only after recording and must never alter or misrepresent the software interface.
- Captions and a complete transcript are produced before professional review.
- Any presenter window stays small, is positioned clear of technical content, and is hidden on mobile widths and on dense technical screens.
Interface visibility on every recording
- The full application interface is shown at the beginning of every demonstration, with the application identity and exact version clearly visible.
- The relevant menu bar, ribbon, toolbar or toolbox stays visible while each step is explained; the interface context is never cropped away.
- Layers, properties, project browser or data panels are shown wherever applicable.
- The command line, status bar or coordinate/CRS information is shown wherever relevant.
- Real cursor movement and visible clicks are captured, with visible cursor highlighting or click indicators.
- The selected tool and its effect are visible, and complete dialog boxes and settings are shown whenever one is opened.
- The resulting drawing, map, model or output is shown in the recording.
- Zoom is used only when necessary for small text or settings, always retaining enough context to identify the application and tool in use.
- The standard applies to every software course and is verified before any video is marked recorded or approved; if the required authentic interface is not visible, the lesson remains “Video lesson: Not recorded — authentic professional recording required.”
Never used
- Generic website mockups standing in for a software workspace.
- Simulated, redrawn, reconstructed or redesigned replica interfaces for any software.
- AI-generated software screens, panels, dialogs or map canvases.
- Generic illustrations replacing the real interface.
- Unverified screenshots taken from any source other than the recorded session.
- Fake video players, placeholder thumbnails or invented durations.
- Invented menus, tool names, command names, dialog options or keyboard shortcuts.
- Hiding important controls or covering them with a presenter window.
- Annotations that alter or misrepresent the recorded software interface.
- Claiming or implying that a simulated screen is an authentic software demonstration.
AutoCAD — what the recording must show
Exact AutoCAD release to be stated from the recorded session. Operating system to be stated from the recorded session; ribbon layout and shortcuts differ between Windows and Mac.
- 1.Drawing setup: new drawing, template choice and workspace.
- 2.Units: the UNITS dialog, unit type, precision and insertion scale.
- 3.Layers: the Layer Properties Manager, layer creation, colour, linetype and lineweight.
- 4.Object properties: the Properties palette and how an object's layer and overrides are read.
- 5.Commands: the command line with the exact command typed, including options and prompts.
- 6.Dimensions: dimension style settings and a dimension placed on real geometry.
- 7.Layouts: layout tabs, sheet size and page setup.
- 8.Viewports: viewport creation, scale setting and viewport locking.
- 9.Title blocks: title block insertion and completion of the sheet fields.
- 10.Plot settings: the PLOT dialog, plot style, paper size, scale and preview.
- 11.Final drawing checks: audit, purge, layer check and a measured check against the plotted scale.
QGIS — what the recording must show
Exact QGIS version to be stated from the recorded session. Operating system to be stated from the recorded session; menu positions and file dialogs differ between systems.
- 1.Project CRS: Project Properties, the CRS tab and the selected coordinate reference system.
- 2.Layer loading: the Data Source Manager or Browser panel and the layer added to the canvas.
- 3.Layer properties: the Layer Properties dialog and each tab used in the lesson.
- 4.Symbology: the Symbology tab with the real renderer, classes and colour settings.
- 5.Attribute tables: the attribute table, field values, selection and expression use.
- 6.Processing tools: the Processing Toolbox with the tool searched and opened by its real name.
- 7.Analysis settings: every parameter in the tool dialog, including output location.
- 8.Map layout: the Print Layout window, page setup and map item.
- 9.Legend, scale and north arrow: each item added from the real layout toolbar.
- 10.Export and quality checks: the export dialog settings and a check of the exported file.
No authentic software recording or screenshot exists yet. Every software lesson remains “Video lesson: Not recorded — authentic professional recording required.”
Real professional classroom experience — every lesson
Applies to every future Academy lesson, software-based or not. The finished lesson presents as authentic professional training, professionally narrated and screen-led: video + written guide + supporting data + practical task + quality checklist + final named deliverable.
Lesson structure
- 1.Professional introduction.
- 2.Realistic project situation.
- 3.Learner role within that situation.
- 4.Problem statement.
- 5.Learning objectives.
- 6.Required software and data.
- 7.Step-by-step demonstration.
- 8.Explanation of the professional reasoning behind each action.
- 9.Practical learner task.
- 10.Checkpoint or pause activity.
- 11.Common mistake and its correction.
- 12.Quality-control review.
- 13.Final recap.
- 14.Named learner deliverable.
Video requirements
- Professional narration that is clear, natural and paced for instruction, synchronised with the screen action.
- Authentic screen recording from the actual software, with visible menus, tools, panels, commands, settings and outputs.
- Natural cursor movement and deliberate pacing, with a clear explanation of why each action is taken.
- Realistic corrections and troubleshooting shown, not edited away.
- Clear 16:9 screen capture.
- Captions and a complete transcript.
- Chapter titles and lesson sections.
- A small presenter window only where useful; it never covers technical content and is hidden on mobile or dense technical screens.
Never produced as a lesson
- Automated slideshows.
- Generic screen tours.
- Silent software demonstrations.
- Marketing videos presented as lessons.
- AI-avatar presentations.
- Simulated software tutorials.
- Fast montages without explanation.
- An invented tutor, instructor identity, voice, recording, thumbnail or completion status.
Lessons use only synthetic, publicly licensed or Ideeplan-owned examples. No confidential client information is used.
No genuine professional recording exists yet. Until one does, every lesson remains “Video lesson: Not recorded — authentic professional recording required.” Enrolment, payments, certificates and protected learner access stay disabled during this production stage.
Professional narration and screen-first production
- Every Academy lesson is planned as a professionally narrated, screen-led practical lesson with captions and a complete transcript.
- No AI avatar, virtual presenter or artificial talking head is used, and no named person is imitated. No lesson is described as human-narrated, instructor-led by a named person or personally presented unless that is factually true.
- No instructor identity is published until a real, named professional has recorded and approved the lesson.
- Recordings are screen-first: the GIS view, planning drawing, AutoCAD or Revit workspace or document remains the main subject of the frame.
- Any presenter picture-in-picture normally occupies about 8–10% of the frame, never covers technical content, and is reduced or hidden on small screens.
- The Principal Consultant portrait is reserved for approved introductions and conclusions. It is never used as a repeated course thumbnail, and the Academy remains company-first.
No lesson has been recorded and no narration has been produced. Scripts exist as production plans only, and every lesson video status remains “Not recorded”.
Demonstration material is synthetic, publicly licensed or owned by Ideeplan Consult. No confidential client file, unauthorised agency dataset or private project information is used.
Methods are jurisdiction-neutral. Learners must confirm local laws, policies and technical standards before applying them to a real project.
A production plan describes how a lesson would be recorded. It is not a recording, and it does not create an enrolment, account, payment or reserved place.
9 lesson production plans · suggested recording time about 90 minutes in total (a planning estimate, not a recorded duration) · every lesson video status: Not recorded.
Lesson 1 · Video lesson: Not recorded — authentic professional recording required.
Unit typologies and occupier requirements
- Learning objective
- Small trade units, mid-box industrial, large distribution and last-mile formats; how clear height, dock ratio, yard depth, staff parking and HGV parking differ, and why one plot depth cannot serve all of them.
- Narration focus
- Start from how the estate will be used, not from how it draws.
- Screen action
- Build a requirement schedule for four typologies with footprint, yard depth and parking demand.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Ideeplan-owned unit typology teaching dataset with indicative footprints, yard depths, dock and parking ratios.
- Expected learner output
- Each typology has a stated minimum plot depth derived from its yard requirement.
- Suggested length
- About 8 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Small trade units, mid-box industrial, large distribution and last-mile formats; how clear height, dock ratio, yard depth, staff parking and HGV parking differ, and why one plot depth cannot serve all of them.
- 2.Build a requirement schedule for four typologies with footprint, yard depth and parking demand.
- 3.Each typology has a stated minimum plot depth derived from its yard requirement.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 2 · Video lesson: Not recorded — authentic professional recording required.
Plot sizing, ratios and developable structure
- Learning objective
- Site coverage ratios, the relationship between plot depth and yard function, avoiding unusable residual plots, and testing plot flexibility for future subdivision or amalgamation.
- Narration focus
- Start from how the estate will be used, not from how it draws.
- Screen action
- Produce a plot structure for the site with sizes, coverage ratios and a flexibility note per plot.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Ideeplan-owned unit typology teaching dataset with indicative footprints, yard depths, dock and parking ratios.
- Expected learner output
- No plot is drawn that cannot accommodate at least one stated typology.
- Suggested length
- About 10 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Site coverage ratios, the relationship between plot depth and yard function, avoiding unusable residual plots, and testing plot flexibility for future subdivision or amalgamation.
- 2.Produce a plot structure for the site with sizes, coverage ratios and a flexibility note per plot.
- 3.No plot is drawn that cannot accommodate at least one stated typology.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 3 · Video lesson: Not recorded — authentic professional recording required.
Access strategy and the design vehicle
- Learning objective
- Choosing the design vehicle, junction capacity considerations at concept level, separating HGV from staff and visitor movement, and the geometry implications for every internal corner.
- Narration focus
- Start from how the estate will be used, not from how it draws.
- Screen action
- Set the access strategy and demonstrate a design-vehicle swept path at three critical points.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Ideeplan-owned unit typology teaching dataset with indicative footprints, yard depths, dock and parking ratios.
- Expected learner output
- Each critical corner is tested rather than assumed adequate.
- Suggested length
- About 12 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Choosing the design vehicle, junction capacity considerations at concept level, separating HGV from staff and visitor movement, and the geometry implications for every internal corner.
- 2.Set the access strategy and demonstrate a design-vehicle swept path at three critical points.
- 3.Each critical corner is tested rather than assumed adequate.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 4 · Video lesson: Not recorded — authentic professional recording required.
Estate road hierarchy and servicing
- Learning objective
- Spine, secondary and plot access roads; turning heads and their real footprint; refuse, fire and emergency access; and how a loop can outperform a series of dead ends.
- Narration focus
- Make the estate physically work across the site's topography.
- Screen action
- Draw the estate road hierarchy with turning provision and mark every servicing route.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Synthetic contour set, watercourse alignment and Ideeplan-owned drainage teaching parameters.
- Expected learner output
- No plot depends on a reversing manoeuvre onto the spine road.
- Suggested length
- About 8 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Spine, secondary and plot access roads; turning heads and their real footprint; refuse, fire and emergency access; and how a loop can outperform a series of dead ends.
- 2.Draw the estate road hierarchy with turning provision and mark every servicing route.
- 3.No plot depends on a reversing manoeuvre onto the spine road.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 5 · Video lesson: Not recorded — authentic professional recording required.
Levels, platforms and earthworks balance
- Learning objective
- Setting plot platforms across a level change, gradient limits for yards and roads, retaining requirements, and the cost logic of a balanced cut and fill.
- Narration focus
- Make the estate physically work across the site's topography.
- Screen action
- Produce a platform levels strategy with an indicative cut-and-fill balance statement.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Synthetic contour set, watercourse alignment and Ideeplan-owned drainage teaching parameters.
- Expected learner output
- Yard gradients stay within stated operational limits and the earthworks balance is quantified.
- Suggested length
- About 10 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Setting plot platforms across a level change, gradient limits for yards and roads, retaining requirements, and the cost logic of a balanced cut and fill.
- 2.Produce a platform levels strategy with an indicative cut-and-fill balance statement.
- 3.Yard gradients stay within stated operational limits and the earthworks balance is quantified.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 6 · Video lesson: Not recorded — authentic professional recording required.
Drainage capacity and land take
- Learning objective
- Impermeable area from large roofs and yards, attenuation land requirement, outfall constraints, treatment for yard runoff, and reserving drainage land at plot planning stage.
- Narration focus
- Make the estate physically work across the site's topography.
- Screen action
- Calculate indicative attenuation land for the estate and reserve it on the layout.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Synthetic contour set, watercourse alignment and Ideeplan-owned drainage teaching parameters.
- Expected learner output
- Attenuation land is located, sized and connected to a credible outfall.
- Suggested length
- About 12 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Impermeable area from large roofs and yards, attenuation land requirement, outfall constraints, treatment for yard runoff, and reserving drainage land at plot planning stage.
- 2.Calculate indicative attenuation land for the estate and reserve it on the layout.
- 3.Attenuation land is located, sized and connected to a credible outfall.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 7 · Video lesson: Not recorded — authentic professional recording required.
Residential interface, landscape and amenity
- Learning objective
- Buffer depth that actually mitigates, planting that works in the first five years, lighting and noise-sensitive layout decisions, boundary treatment and screening of yards rather than of buildings only.
- Narration focus
- Resolve the residential interface and set out a deliverable framework.
- Screen action
- Design the southern interface with a sectioned buffer and a written mitigation rationale.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Synthetic residential edge context and an Ideeplan-owned framework document structure.
- Expected learner output
- The buffer is drawn in section, not described in prose alone.
- Suggested length
- About 8 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Buffer depth that actually mitigates, planting that works in the first five years, lighting and noise-sensitive layout decisions, boundary treatment and screening of yards rather than of buildings only.
- 2.Design the southern interface with a sectioned buffer and a written mitigation rationale.
- 3.The buffer is drawn in section, not described in prose alone.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 8 · Video lesson: Not recorded — authentic professional recording required.
Phasing and infrastructure sequencing
- Learning objective
- Delivering access, drainage and spine road in phase one, keeping later plots serviceable, temporary conditions for undeveloped land, and phase boundaries that can be built independently.
- Narration focus
- Resolve the residential interface and set out a deliverable framework.
- Screen action
- Produce a three-phase plan with the infrastructure required to open each phase.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Synthetic residential edge context and an Ideeplan-owned framework document structure.
- Expected learner output
- Each phase is independently occupiable with its own access, drainage and servicing.
- Suggested length
- About 10 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Delivering access, drainage and spine road in phase one, keeping later plots serviceable, temporary conditions for undeveloped land, and phase boundaries that can be built independently.
- 2.Produce a three-phase plan with the infrastructure required to open each phase.
- 3.Each phase is independently occupiable with its own access, drainage and servicing.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 9 · Video lesson: Not recorded — authentic professional recording required.
Plot schedule, floorspace yield and the framework document
- Learning objective
- Assembling the plot schedule, calculating indicative floorspace and job-density style metrics with stated caveats, and packaging a framework that guides later detailed applications.
- Narration focus
- Resolve the residential interface and set out a deliverable framework.
- Screen action
- Produce the plot schedule and floorspace summary and assemble the framework document.
- Required software
- AutoCAD, QGIS, Spreadsheet software
- Example data
- Synthetic residential edge context and an Ideeplan-owned framework document structure.
- Expected learner output
- Schedule areas reconcile with the drawn layout to within a stated tolerance.
- Suggested length
- About 12 minutes (planning estimate)
- Captions and transcript
- Required before professional review
- Narration
- Professional narration — not yet produced
Demonstration sequence
- 1.Assembling the plot schedule, calculating indicative floorspace and job-density style metrics with stated caveats, and packaging a framework that guides later detailed applications.
- 2.Produce the plot schedule and floorspace summary and assemble the framework document.
- 3.Schedule areas reconcile with the drawn layout to within a stated tolerance.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to AutoCAD, QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Course production standard
- Recordings are screen-first: the planning drawing, GIS view, AutoCAD or Revit workspace stays the main subject of the frame.
- Any presenter picture-in-picture normally occupies no more than about 8–10% of the frame and never covers maps, legends, drawings, dimensions or annotations.
- On mobile and on dense technical screens the presenter window is reduced further or hidden entirely.
- The Principal Consultant portrait is reserved for approved introductions, explanations and conclusions. It is not used as a generic thumbnail for every course.
- Narration is planned for professional human delivery. No AI narration, AI presenter or recorded lesson exists today.
No lesson has been recorded. Every lesson media status is “Not recorded”.
Any example data used in teaching is synthetic, publicly licensed or owned by Ideeplan Consult, and is clearly labelled as demonstration data. No client file, confidential document or unauthorised project material is used.
Want this course finished first?
Registering interest is not an enrolment. It tells Ideeplan Consult which subjects to complete and review first.