Applied professional course

GIS for Transport Accessibility and Network Analysis

Measure who can reach what, using network analysis, catchments and accessibility mapping to support planning decisions.

Catalogue status: PlannedProfessional review: Not yet reviewed

Written teaching content: available for review

Video lessons have not yet been recorded. Written teaching content may be available for review below.

Written teaching content only. This course is not yet available: it has not been professionally reviewed, no lesson is recorded, and enrolment, payment, certificates, downloads and protected access are all disabled.

Review Written Course Content

Reading only. This is not enrolment, booking, purchase, account access, a download or protected learning access.

Written content: Available for review
Video lessons: Not recorded
Professional review: Not yet completed
Enrolment: Not available
Payment: Disabled
Certificates: Disabled
Downloads: Disabled
Protected access: Disabled

Written course content

Return to course overview Return to planned curriculum

Client-style brief

A planning team preparing a growth-area evidence base needs to show, with reproducible analysis, which parts of the area are genuinely accessible on foot, by cycle and by public transport, and where new development would depend on car travel. Their previous evidence used straight-line buffers and was challenged.

Professional scenario

Synthetic growth area of roughly 40 square kilometres containing a town centre, three villages, a rail station, a bus network and a river with three crossings.

Planning problem

Straight-line catchments overstate access and hide severance. The professional problem is to measure accessibility along the real network, to treat barriers and service frequency honestly, and to produce evidence another analyst can reproduce.

Learning objectives

Build a clean, routable network from raw line data.
Produce network-based catchments for walking, cycling and public transport.
Analyse severance, crossings and network gaps.
Combine accessibility with land use to identify car-dependent locations.
Document method so the analysis is reproducible and defensible.

Modules and lessons

0 of 9 lessons open

Module 1
Module 1 — Network data and topology
Make the network trustworthy before measuring anything with it.
Example data: Synthetic road, path and crossing network with deliberate topology errors, plus a synthetic timetable extract.
Module output: Cleaned, routable network with a documented data-quality log.
Module 2
Module 2 — Accessibility analysis
Measure access along the network for each mode, honestly.
Example data: Synthetic service points, stop locations and frequency teaching data.
Module output: Multimodal accessibility catchment set with method documentation.
Module 3
Module 3 — Evidence, cartography and reproducibility
Turn analysis into evidence that withstands scrutiny.
Example data: Synthetic population grid and land-use layer, plus Ideeplan-owned map templates.
Module output: Accessibility evidence-base report with reproducible method statement.

Project brief

A synthetic 40 square kilometre growth area with a town centre, three villages, a rail station, a bus network and a river with three crossings.

Your role: GIS analyst producing accessibility evidence for a planning team.

Information available

Synthetic network, crossing and barrier layers with seeded errors.
Synthetic stop, frequency, population and land-use teaching data.
Ideeplan-owned map and method-statement templates.

Required analysis

Network cleaning and connectivity verification.
Walk, cycle and frequency-weighted public transport catchments.
Severance and detour analysis, with a crossing scenario.
Population and land-use intersection.

Required outputs

Data-quality and fitness-for-purpose log.
Multimodal catchment map set.
Severance and detour analysis with a scenario test.
Car-dependency map and statistics table.
Reproducible method statement.

Presentation standard: Every map states projection, sources, date basis, classification and limitations. Every figure in the text matches the table it comes from.

Marking criteria

Network integrity: Connectivity is verified and errors are logged, not silently fixed.
Method honesty: Catchments are network-based and assumptions are stated.
Frequency treatment: Public transport access is weighted by service level.
Cartographic quality: Maps pass the QA checklist in full.
Reproducibility: A second analyst can rebuild the result from the method statement.

Quality-assurance checklist

Connectivity test passes on the final network.
No catchment in the deliverable is a straight-line buffer.
Every parameter value appears in the method statement.
Classification breaks are stated and justified.
Limitations section names the data gaps that matter.

Common mistakes and correction tasks

Using straight-line buffers as catchments. Correction: Rebuild as network service areas and report the overstatement removed.
Treating any bus stop as public transport access. Correction: Weight stops by frequency and re-map the accessibility surface.
Unsnapped network nodes producing island catchments. Correction: Repair topology, re-run the analysis and log the change in results.
Maps without projection, source or classification statements. Correction: Complete the map metadata block on every output.

Final deliverable

Transport accessibility evidence base with reproducible method statement

Audience and role

GIS analysts, transport planners, spatial planners and evidence-base authors in consultancies and authorities.

You act as the GIS analyst producing an accessibility evidence base for a planning team.

Prerequisites

Working knowledge of QGIS: layers, attributes, joins and basic geoprocessing.
Understanding of coordinate reference systems.

Software access and licensing

Ideeplan Consult provides professional instruction, exercises, synthetic practice data and learning resources. It does not provide, purchase or pay for software licences on behalf of learners.

Required software

QGIS
Suggested version: QGIS 3.x long-term release. Learners or their employers must obtain lawful access.
QGIS project (official website)
Alternative: Browser-based map-reading exercise — Where a learner has no GIS software, selected exercises can be followed as view-only demonstrations. This is not full hands-on GIS training.
Spreadsheet software
Suggested version: Any modern spreadsheet application. Learners or their employers must obtain lawful access.
LibreOffice Calc (official website)
Alternative: Google Sheets — A browser-based alternative suitable for the calculation exercises. It is not identical to desktop spreadsheet software.

Learners or their employers must obtain lawful access to any required software before starting the practical exercises.
Only official software-provider websites are linked from this site. Ideeplan Consult does not host installers.
No shared accounts, passwords, activation keys or cracked software are provided, and software credentials are never collected or stored.
Ideeplan Consult claims no endorsement, partnership or sponsorship by any software provider.
Software licence costs are not included in any Ideeplan course fee, and no trial, student, educational or free licence is promised to be available.
Where a legitimate alternative is suitable, it is identified separately and is not claimed to be identical to the required software.
If a learner lacks the required software, a view-only demonstration or browser-based exercise may be offered where possible; this is never described as full hands-on software training.

Where to obtain project data

Every exercise in this course uses synthetic or Ideeplan-owned training data. This section explains how to replace that training data with lawful local project data in your own jurisdiction when you apply the method to a real site.

Free access and free reuse are different things. A dataset you can view or download is not automatically a dataset you may republish, adapt or use in a paid commercial deliverable.
Confirm the current licence on the source website before you reuse anything. Terms, prices and availability change without notice.
Ideeplan Consult does not host, redistribute or resell any third-party dataset, and links only to official or openly licensed public sources.
Never use private, confidential, pirated, scraped or otherwise unauthorised data. If a source requires a licence or a fee, obtain it properly or use an alternative.
Record the version, extraction date and coverage of every dataset you use, and cite it in the report and in the map credit block.
Ideeplan training coordinates are supplied on a named local grid (IDP-LOCAL-GRID) in metres. Local synthetic training grid in metres: not georeferenced to the Earth and not suitable for overlaying with real-world basemaps without a separately supplied transformation. Never attach an EPSG code, projection file or real-world CRS to training data that has none.
When you move to a real site, obtain the coordinate reference system from the survey or the mapping agency and record it in the drawing and the report. Do not infer or guess a CRS from the numbers.
If a public source becomes unavailable, changes its terms or starts charging, use the alternative listed here — the synthetic training dataset remains available for practice either way.

Data used in this course

Base mapping and street networks
Access: Varies by jurisdiction
What you need: A base map of roads, footways, buildings, water features and place names covering the study area.
Why it is required: Every site plan, constraints plan and analysis drawing needs a locational base so the reader can orient the proposal against real streets, blocks and landmarks.
Preferred source: The national mapping agency of the country in which the site sits — National mapping agency. National mapping agencies publish the most positionally reliable base mapping. Access and licensing differ by country: some publish open products, others license mapping commercially or to registered professionals only. Confirm the terms with the agency before reuse.
Alternative: OpenStreetMap — OpenStreetMap Foundation and its contributors. Global, openly licensed and editable. Completeness varies sharply between areas.
Alternative: Geofabrik OpenStreetMap extracts — Geofabrik GmbH. Country and region extracts of OpenStreetMap data in GIS-ready formats.
Licence: OpenStreetMap data is published under the Open Database Licence (ODbL) 1.0. National mapping agency products carry their own licence, which is often not open.
Permitted reuse: ODbL permits copying, adaptation and commercial use provided the source is attributed and any distributed derivative database is shared under the same licence. This share-alike condition is a real obligation on consultancy deliverables that distribute data, so read it before use. Agency mapping may prohibit reuse entirely without a licence.
Required attribution: For OpenStreetMap: "© OpenStreetMap contributors", with a reference to the ODbL. Agency mapping must carry the credit wording that agency specifies.
Date, version and coverage: OpenStreetMap is continuously edited, so record the extraction date. Coverage is global. Agency mapping has a stated revision cycle and covers that country only.
Scale, accuracy and limitations: OpenStreetMap has no guaranteed positional accuracy, no consistent capture scale and uneven attribute completeness; building footprints and address data are missing in many areas. It is suitable for context and analysis, not for boundary determination or measured survey.
How to access lawfully: View directly in the browser, or download a regional extract and open it in GIS software. Do not scrape the live map tiles in bulk.
How to cite: OpenStreetMap contributors (year) OpenStreetMap [dataset]. Extracted [date]. Licensed under ODbL 1.0. Available at openstreetmap.org.
Administrative boundaries
Access: Varies by jurisdiction
What you need: Boundaries of the country, state or region, local government area and ward or district containing the site.
Why it is required: Boundaries define which authority determines the application, which policies apply and how statistics are aggregated for the study area.
Preferred source: The national statistical office or national mapping agency of the country concerned — National statistical office. Official boundaries are the only defensible source for reporting, because they match the units used in published statistics.
Alternative: Humanitarian Data Exchange (HDX) common operational datasets — UN OCHA. Country administrative boundary sets, usually endorsed by the national authority. Licences differ per dataset.
Alternative: Natural Earth — Natural Earth. Small-scale global boundaries in the public domain. Suitable for context maps only.
Licence: Natural Earth is public domain. HDX datasets carry per-dataset licences, commonly Creative Commons. National datasets carry the publishing authority's terms.
Permitted reuse: Public-domain boundaries may be reused freely, including commercially. Creative Commons datasets require attribution and may add conditions. An authority's boundary file may be viewable online yet still not licensed for redistribution — check before including it in a deliverable.
Required attribution: Name the publishing authority and the dataset title in the map credit block, with the licence where one is stated.
Date, version and coverage: Boundaries change through reorganisation, so record the release year and confirm it is the version in force at the assessment date. Coverage is national.
Scale, accuracy and limitations: Generalised boundary files are drawn for cartography, not for legal boundary determination. Coastal and river boundaries are frequently simplified. Never use them to determine ownership or a legal limit.
How to access lawfully: Download from the publishing authority's open-data portal, or from HDX where the authority has released it there.
How to cite: [Publishing authority] (year) [Dataset title], version [x] [dataset]. Accessed [date]. Available at [official URL].
Aerial and satellite imagery
Access: Open access
What you need: Recent imagery of the site and its surroundings for context, land-use reading and change detection.
Why it is required: Imagery evidences existing site conditions, vegetation, access and surrounding development at a known date, which supports the appraisal narrative.
Preferred source: Copernicus Sentinel-2 imagery via the Copernicus Data Space Ecosystem — European Union / European Space Agency.
Alternative: USGS EarthExplorer (Landsat archive) — United States Geological Survey. Long historical archive, useful for change over decades.
Alternative: OpenAerialMap — Humanitarian OpenStreetMap Team. Openly licensed aerial imagery contributed by others. Coverage is patchy.
Licence: Sentinel data is published under the Copernicus open and free data policy. Landsat products from USGS are in the public domain. OpenAerialMap imagery carries the licence chosen by each contributor, commonly CC BY 4.0.
Permitted reuse: Copernicus and USGS products may be reused, adapted and used commercially with attribution. Imagery viewed inside a commercial web-map viewer is a different matter entirely: being able to see it in a browser does not license you to export, trace or publish it.
Required attribution: "Contains modified Copernicus Sentinel data [year]" for Sentinel; "Courtesy of the U.S. Geological Survey" for Landsat; the contributor credit and licence for OpenAerialMap.
Date, version and coverage: Record the acquisition date of the specific scene, not the download date. Sentinel-2 revisits every few days globally; Landsat covers 1972 onwards.
Scale, accuracy and limitations: Sentinel-2 is 10–20 m ground resolution and Landsat is 30 m, so neither shows individual building detail. Cloud cover, shadow and seasonal vegetation change all affect interpretation. Imagery is not a survey and must not be measured from as though it were.
How to access lawfully: Register a free account with the provider, search by area and date, filter by cloud cover, then download the scene. Do not download tiles from a commercial basemap outside its terms.
How to cite: European Union / ESA / Copernicus (year) Sentinel-2 scene [ID], acquired [date] [satellite image]. Accessed [date].
Elevation and terrain
Access: Open access
What you need: A digital elevation model for slope, aspect, drainage direction and levels context.
Why it is required: Slope and drainage govern developable area, road gradients, earthworks cost and surface-water risk, so terrain shapes the layout before anything is drawn.
Preferred source: Copernicus DEM via the Copernicus Data Space Ecosystem — European Union / European Space Agency.
Alternative: NASA SRTM via USGS EarthExplorer — NASA / USGS. Approximately 30 m global elevation, widely used for screening.
Alternative: OpenTopography — OpenTopography Facility. High-resolution lidar where a survey has been flown and released; coverage is limited and per-dataset licences apply.
Licence: SRTM products from USGS are public domain. Copernicus DEM instances are released under the Copernicus licence, which permits reuse with attribution. OpenTopography datasets carry the licence set by each data owner.
Permitted reuse: Reuse, adaptation and commercial use are permitted for the public-domain and Copernicus products with the required credit. Confirm the per-dataset terms on OpenTopography before including a lidar derivative in a paid deliverable.
Required attribution: Credit the mission and steward, for example "Contains modified Copernicus DEM data" or "SRTM data courtesy of NASA/USGS".
Date, version and coverage: SRTM was captured in 2000 and does not reflect later earthworks. Copernicus DEM is compiled from more recent acquisitions. Both are near-global; note the tile version.
Scale, accuracy and limitations: Global DEMs are roughly 30 m horizontal resolution with vertical error typically measured in metres, and they represent surface height including tree canopy and buildings, not bare ground. They are screening tools only and never a substitute for a topographic survey for design levels.
How to access lawfully: Register with the portal, select tiles covering the study area, download, then reproject into the local projected coordinate system before deriving slope.
How to cite: [Mission] (year) [Product name], tile [ID] [dataset]. Accessed [date]. Available at [official URL].
Land cover and land use
Access: Open access
What you need: A land-cover classification showing built-up area, cropland, vegetation, bare ground and water.
Why it is required: Land cover supports constraint mapping, loss-of-agricultural-land arguments, green-infrastructure analysis and the growth narrative in a settlement study.
Preferred source: ESA WorldCover — European Space Agency.
Alternative: Global Human Settlement Layer (GHSL) — European Commission Joint Research Centre. Built-up surface and settlement layers, useful for urbanisation trends.
Alternative: The land-use record of the local planning authority — Local planning authority. Where published, an authority's own land-use survey is more authoritative locally than any global product.
Licence: ESA WorldCover and GHSL products are published under Creative Commons Attribution 4.0. Local authority land-use records carry the authority's own terms and are often view-only.
Permitted reuse: CC BY 4.0 permits copying, adaptation and commercial use with attribution. A land-use map an authority displays on a public viewer may not be licensed for extraction — ask the authority for a data licence rather than digitising the screen.
Required attribution: Credit the producer, product name, year and the CC BY 4.0 licence in the map credit block.
Date, version and coverage: State the product year, for example WorldCover 2021. Coverage is global at that epoch, so it will not reflect development completed since.
Scale, accuracy and limitations: Global land cover is typically 10–100 m resolution with class accuracy in the region of 75–80 per cent, and it confuses similar classes such as bare ground and low-density development. Verify against imagery and a site visit before relying on any single pixel.
How to access lawfully: Download the tiles covering the study area from the producer's portal, or consume the published web service inside GIS software.
How to cite: [Producer] (year) [Product name] v[x] [dataset]. Licensed under CC BY 4.0. Accessed [date].
Population, housing and socio-economic statistics
Access: Varies by jurisdiction
What you need: Census or survey figures for population, households, household size, tenure, employment and deprivation for the study area.
Why it is required: Need assessments, demand forecasts, catchment tests and infrastructure sizing all rest on published population and household evidence rather than assertion.
Preferred source: The national statistical office of the country concerned — National statistical office. Census and official survey outputs are the defensible baseline because they are the figures an authority and an inspector will recognise.
Alternative: WorldPop — WorldPop, University of Southampton. Modelled gridded population where census small-area data is unavailable.
Alternative: UN Data — United Nations Statistics Division. Comparable national indicators for context and benchmarking.
Licence: WorldPop datasets are published under Creative Commons Attribution 4.0. National statistical outputs carry the office's own terms; many are open with attribution, some restrict redistribution of microdata.
Permitted reuse: CC BY 4.0 statistics may be reused commercially with attribution. Microdata and small-area tables are often released only under a licence agreement or safeguarded access, and must never be re-identified or redistributed.
Required attribution: Cite the office, the table or dataset reference and the reference year beneath every derived table and chart.
Date, version and coverage: Record the census or survey reference year, not the download year, and state the geography level used, for example ward or enumeration area.
Scale, accuracy and limitations: Census data ages quickly between rounds, small-area figures may be rounded or suppressed to protect confidentiality, and modelled gridded population is an estimate that can be materially wrong at neighbourhood level. Do not present modelled counts as observed counts.
How to access lawfully: Download the published table or dataset from the statistical office's release page, or the gridded raster from the producer's portal.
How to cite: [Statistical office] (year) [Table or dataset title], reference year [year] [dataset]. Accessed [date]. Available at [official URL].
Transport networks and travel data
Access: Varies by jurisdiction
What you need: Road hierarchy, public transport stops and routes, timetables, walking and cycling networks, and traffic or patronage counts where published.
Why it is required: Accessibility analysis, parking justification, trip generation and active-travel proposals all require an evidenced network and service picture rather than assumption.
Preferred source: The transport authority or transport operator serving the study area — Transport authority. Many authorities publish schedule data in the GTFS format and count data on their open-data portal.
Alternative: OpenStreetMap transport network — OpenStreetMap Foundation and its contributors. Road, footway and cycleway geometry where an authority network is unavailable.
Alternative: Mobility Database — MobilityData. A catalogue of publicly available transport schedule feeds; each feed keeps its publisher's licence.
Licence: OpenStreetMap is ODbL 1.0. Authority feeds carry the publisher's own licence, frequently an open government licence but sometimes restricted to non-commercial or attribution-only use.
Permitted reuse: Check each feed individually. A timetable published for passenger information is not automatically licensed for redistribution inside a consultancy report or a commercial application, and ODbL share-alike applies if you distribute a derived database.
Required attribution: Credit the operator or authority and the feed name, and give the feed date, because services change frequently.
Date, version and coverage: Schedule feeds have an explicit validity period — state it. Count data must be dated and the count location identified.
Scale, accuracy and limitations: Scheduled service is not observed service; reliability, crowding and informal transport are usually absent. Counts represent a specific day and season. Informal and paratransit networks are often entirely unmapped, which materially affects analysis in many cities.
How to access lawfully: Download the published feed or dataset from the authority's open-data page, or extract the network from OpenStreetMap for the study area.
How to cite: [Authority or operator] (year) [Feed or dataset title], valid [dates] [dataset]. Accessed [date].

Where no suitable public source exists in your jurisdiction, complete the exercise with the synthetic training dataset and record the data gap as a limitation in your report. Stating a limitation honestly is professional practice; inventing data is not.

Method and limitations

Accessibility is measured along the network people actually use. Evidence that cannot be reproduced is not evidence.

The method taught here is jurisdiction-neutral professional practice. Statutory tests, validation lists, density and parking standards, open-space and drainage requirements, accessibility standards, consultation procedures and appeal routes differ by country and by authority. Local laws, policies and standards must be confirmed with the relevant authority before any of this method is applied to a real site. Nothing here is legal advice and no course confers a licence or a right to practise.

All example material is synthetic teaching data, publicly available information or Ideeplan-owned method. No client name, commissioned document, confidential project file or copyrighted third-party course material is used or distributed.

Register Interest is an expression of interest only. It creates no account, enrolment, reservation, payment or course access.

Enrolment status

Enrolment is not currently available. This course is still undergoing content, media and professional review.

Register Interest is an expression of interest only. It works without an account, creates no enrolment, no reserved place and no payment order.

Protected lessons, approved videos and approved resource files are not accessible. No protected file URL, signed link or download entitlement is created.

Payments are disabled. No price, checkout, payment provider, payment order or paid-course claim exists in the Academy.

Outstanding before enrolment could open

Outstanding — Professional content review is complete
Outstanding — Required videos recorded, reviewed and approved, or the course approved as written-only
Outstanding — Required practical resources approved and available
Outstanding — Learner terms approved
Outstanding — Privacy and data-handling requirements approved
Outstanding — Course availability explicitly enabled by an authorised administrator
Outstanding — Payment and refund terms approved (paid courses)
Outstanding — Payment provider configuration complete (where payment is required)
Outstanding — Authentication email delivery configured and tested
Outstanding — Protected content access tested
Outstanding — Approved delivery and support process in place

Review Written Course Content Register Interest Return to Academy Return to Planned Curriculum

Progress, assessment and certificates

Submission access is not currently available

Lesson and course progress tracking is not active. No progress record, completion percentage or completed lesson exists for any account, and no course can record progress until enrolment opens.

Practical assessments cannot be submitted. Submission access is not currently available: there is no active enrolment, no upload configuration and no authorised reviewer workflow in operation.

No assessment has been marked, reviewed, corrected or passed. Reviewer feedback, correction tasks and pass decisions are made by an authorised human reviewer and none exists.

No certificate is issued, approved or pending. A future Academy certificate would be a course-completion certificate only — not a professional licence, statutory qualification, accreditation or government-recognised award.

Certificate verification is disabled until a certificate is genuinely issued. No verification result is produced for any reference.

Assessment formats planned for the Academy

Written briefs, required deliverables and marking criteria are published inside the course content above for open review. None of them can be submitted or marked at present.

Practical planning task
GIS mapping exercise
Site-appraisal task
Feasibility assessment
CAD or drawing task
Revit coordination task
Planning-report task
Policy-assessment task
Transport or access analysis
Environmental or green-infrastructure exercise
Final course project

Outstanding before completion or a certificate could exist

Outstanding — Learner identity verified by an authorised member of staff
Outstanding — Learner holds a valid active or completed enrolment
Outstanding — All required lessons completed
Outstanding — All required practical assessments passed
Outstanding — A recorded assessment decision exists for every required task
Outstanding — All requested corrections completed
Outstanding — Course content professionally reviewed and signed off
Outstanding — Authorised reviewer has approved completion
Outstanding — Course certificate policy approved
Outstanding — Certificate wording approved by Ideeplan Consult
Outstanding — Course is officially available
Outstanding — Unique certificate numbering and a secure verification route configured

Practical resources

Resources for this course

13 resource records · 13 with a written preview · 0 with a file under preparation · Download access not yet enabled.

All demonstration material is synthetic, publicly licensed or owned by Ideeplan Consult and is labelled as demonstration material. No confidential client file, personal information, private agency document or unreleased project drawing is used.

Practical project brief
Sets the professional situation, the role the learner takes and what must be produced.
Written preview available — downloadable file not yet available
Resource type
Brief
Format
Written brief shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Transport accessibility evidence base with reproducible method statement
Lessons supported
9 — One brief governs the whole course: every lesson exercise contributes to the same final deliverable.
Access
No account required — written preview is public
- A synthetic 40 square kilometre growth area with a town centre, three villages, a rail station, a bus network and a river with three crossings.
- Your role: GIS analyst producing accessibility evidence for a planning team.
- Available information: Synthetic network, crossing and barrier layers with seeded errors.
- Available information: Synthetic stop, frequency, population and land-use teaching data.
- Available information: Ideeplan-owned map and method-statement templates.
- Required analysis: Network cleaning and connectivity verification.
- Required analysis: Walk, cycle and frequency-weighted public transport catchments.
- Required analysis: Severance and detour analysis, with a crossing scenario.
- Required analysis: Population and land-use intersection.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
Client-style instruction and problem statement
Gives the learner the instruction as a practitioner would receive it, and names the problem to be solved.
Written preview available — downloadable file not yet available
Resource type
Brief
Format
Written statement shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Transport accessibility evidence base with reproducible method statement
Lessons supported
9 — Scenario framing applies to every lesson in the course.
Access
No account required — written preview is public
Module 1 learner worksheet — Module 1 — Network data and topology
Lists the practical steps the learner carries out in this module, in order.
Written preview available — downloadable file not yet available
Resource type
Worksheet
Format
Written worksheet shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Cleaned, routable network with a documented data-quality log.
Lessons supported
3 — Supports the 3 lessons in module 1, which build one shared output.
Access
No account required — written preview is public
- Sourcing and assessing network data — Assess the teaching network and write a fitness-for-purpose note.
- Topology cleaning and connectivity — Repair the seeded topology errors and record each correction.
- Impedance, speeds and barriers — Build the impedance field and a barrier layer with stated values.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
Module 2 learner worksheet — Module 2 — Accessibility analysis
Lists the practical steps the learner carries out in this module, in order.
Written preview available — downloadable file not yet available
Resource type
Worksheet
Format
Written worksheet shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Multimodal accessibility catchment set with method documentation.
Lessons supported
3 — Supports the 3 lessons in module 2, which build one shared output.
Access
No account required — written preview is public
- Walk and cycle isochrones — Produce walk and cycle catchments to key services and compare them to buffers.
- Public transport access and frequency weighting — Produce a frequency-weighted public transport accessibility surface for the area.
- Severance, crossings and network gaps — Calculate detour ratios and test the effect of one new crossing.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
Module 3 learner worksheet — Module 3 — Evidence, cartography and reproducibility
Lists the practical steps the learner carries out in this module, in order.
Written preview available — downloadable file not yet available
Resource type
Worksheet
Format
Written worksheet shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Accessibility evidence-base report with reproducible method statement.
Lessons supported
3 — Supports the 3 lessons in module 3, which build one shared output.
Access
No account required — written preview is public
- Combining accessibility with land use and population — Produce a car-dependency map with a supporting statistics table.
- Map quality assurance — Run a QA pass on three maps and log every correction made.
- Writing a reproducible method statement — Write the method statement and have a peer attempt a dry-run reproduction.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
Task checklist
Confirms every required piece of work has been produced before submission.
Written preview available — downloadable file not yet available
Resource type
Checklist
Format
Written checklist shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Transport accessibility evidence base with reproducible method statement
Lessons supported
9 — A single task checklist tracks progress across all modules.
Access
No account required — written preview is public
- Data-quality and fitness-for-purpose log.
- Multimodal catchment map set.
- Severance and detour analysis with a scenario test.
- Car-dependency map and statistics table.
- Reproducible method statement.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.

Example data and drawing base

Synthetic road, path and crossing network with deliberate topology errors, plus a synthetic timetable extract. GIS exercises are planned around plain, checkable formats: CSV and clearly labelled local-grid JSON on the named grid IDP-LOCAL-GRID. GeoJSON is not used for local-grid training data because the format asserts WGS 84 degrees. No QGIS project file, GeoPackage or raster file is claimed.

Written preview available — downloadable file not yet available

Resource type: GIS exercise pack
Format: CSV and local-grid JSON (planned) — no GeoJSON, QGIS project, GeoPackage or raster file is claimed
Status: Planned
Data classification: Synthetic demonstration data
Licence or ownership: Synthetic demonstration material prepared by Ideeplan Consult. No client file, personal information, private agency document or unreleased project drawing is used.
Related deliverable: Transport accessibility evidence base with reproducible method statement
Lessons supported: 9 — One demonstration data base is used by every lesson so results stay comparable.
Access: No account required — written preview is public

Demonstration data item	What it contains and how it is used
Data ownership and licence	Synthetic training data prepared and owned by Ideeplan Consult. It is fictional: it is not a real client project, a real site or a real location, and it must not be presented as one. Free to study on this page; redistribution is not permitted.
Module 1 input — Module 1 — Network data and topology	Synthetic road, path and crossing network with deliberate topology errors, plus a synthetic timetable extract.
Module 2 input — Module 2 — Accessibility analysis	Synthetic service points, stop locations and frequency teaching data.
Module 3 input — Module 3 — Evidence, cartography and reproducibility	Synthetic population grid and land-use layer, plus Ideeplan-owned map templates.
Lawful sourcing where real data is substituted	Where a learner substitutes real data, use only openly licensed or lawfully obtained sources, record the publisher, dataset title, version and access date, and cite them in the final deliverable. Do not use restricted, confidential or personal data.

Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.

Analysis and calculation template
Structures the analysis so assumptions are visible and checkable. Any figures used in a template are teaching assumptions, not market evidence. Local costs, policies, standards and valuation assumptions must be independently confirmed before any of this is applied to a real project.
Written preview available — downloadable file not yet available
Resource type
Suitability matrix
Format
CSV matrix (planned)
Status
Planned
Data classification
Synthetic demonstration data
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Transport accessibility evidence base with reproducible method statement
Lessons supported
9 — The same analysis structure is completed progressively through the course.
Access
No account required — written preview is public
- Record every assumption on its own labelled row, with the source or reason beside it.
- Module 1 working section — Cleaned, routable network with a documented data-quality log.
- Module 2 working section — Multimodal accessibility catchment set with method documentation.
- Module 3 working section — Accessibility evidence-base report with reproducible method statement.
- Required output carried into the analysis — Data-quality and fitness-for-purpose log.
- Required output carried into the analysis — Multimodal catchment map set.
- Required output carried into the analysis — Severance and detour analysis with a scenario test.
- Required output carried into the analysis — Car-dependency map and statistics table.
- Required output carried into the analysis — Reproducible method statement.
- Check row: totals, units and areas reconcile before the result is carried into the deliverable.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
Final deliverable template
Sets the expected structure and presentation standard for Transport accessibility evidence base with reproducible method statement.
Written preview available — downloadable file not yet available
Resource type
Planning-report template
Format
Structured document outline (planned)
Status
Planned
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Transport accessibility evidence base with reproducible method statement
Lessons supported
9 — The final deliverable draws on every module output.
Access
No account required — written preview is public
- Final named deliverable — Transport accessibility evidence base with reproducible method statement
- Section 1 — Cleaned, routable network with a documented data-quality log.
- Section 2 — Multimodal accessibility catchment set with method documentation.
- Section 3 — Accessibility evidence-base report with reproducible method statement.
- Must be present — Data-quality and fitness-for-purpose log.
- Must be present — Multimodal catchment map set.
- Must be present — Severance and detour analysis with a scenario test.
- Must be present — Car-dependency map and statistics table.
- Must be present — Reproducible method statement.
- Presentation and submission standard — Every map states projection, sources, date basis, classification and limitations. Every figure in the text matches the table it comes from.
- Sources and citations: list every dataset, publisher, version and access date used, and state clearly where synthetic Ideeplan training data was used.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
Quality-control checklist
Professional checks to run before the work is treated as finished.
Written preview available — downloadable file not yet available
Resource type
Checklist
Format
Written checklist shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Transport accessibility evidence base with reproducible method statement
Lessons supported
9 — Quality control is applied to the whole submission, not to a single lesson.
Access
No account required — written preview is public
- Connectivity test passes on the final network.
- No catchment in the deliverable is a straight-line buffer.
- Every parameter value appears in the method statement.
- Classification breaks are stated and justified.
- Limitations section names the data gaps that matter.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.

Marking and review rubric

States what a satisfactory professional standard looks like for each criterion.

Written preview available — downloadable file not yet available

Resource type: Marking rubric
Format: Written rubric shown on this page
Status: Draft
Data classification: Ideeplan-owned demonstration material
Licence or ownership: Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable: Transport accessibility evidence base with reproducible method statement
Lessons supported: 9 — One rubric reviews the final deliverable produced across all modules.
Access: No account required — written preview is public

Criterion	Satisfactory standard
Network integrity	Connectivity is verified and errors are logged, not silently fixed.
Method honesty	Catchments are network-based and assumptions are stated.
Frequency treatment	Public transport access is weighted by service level.
Cartographic quality	Maps pass the QA checklist in full.
Reproducibility	A second analyst can rebuild the result from the method statement.

Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.

Correction-task sheet
Common professional mistakes and the correction the learner practises.
Written preview available — downloadable file not yet available
Resource type
Correction-task sheet
Format
Written task sheet shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Transport accessibility evidence base with reproducible method statement
Lessons supported
9 — Correction tasks address mistakes that can appear anywhere in the course.
Access
No account required — written preview is public
- Using straight-line buffers as catchments. — Rebuild as network service areas and report the overstatement removed.
- Treating any bus stop as public transport access. — Weight stops by frequency and re-map the accessibility surface.
- Unsnapped network nodes producing island catchments. — Repair topology, re-run the analysis and log the change in results.
- Maps without projection, source or classification statements. — Complete the map metadata block on every output.
Resource file not yet available. The written instructions on this page are complete and can be followed without any download, account, enrolment or payment.
Submission guidance
How the finished work should be assembled and presented for professional review.
Written preview available — downloadable file not yet available
Resource type
Checklist
Format
Written guidance shown on this page
Status
Draft
Data classification
Ideeplan-owned demonstration material
Licence or ownership
Ideeplan Consult-owned teaching material. Free to read on this page; redistribution is not permitted.
Related deliverable
Transport accessibility evidence base with reproducible method statement
Lessons supported
9 — Submission guidance covers the single final deliverable.
Access
No account required — written preview is public

Media status

Video lessons for this course

Video lessons: Video lesson: Not recorded — authentic professional recording required.
Narration: Professional narration — planned, not produced
Captions: Not yet produced
Transcript: Not yet produced
Software demonstration: Genuine screen capture from the real application only — no mockup, simulated interface or AI-generated screen.
Software version and operating system: No software version is published until it has been read from the actual recorded session. Until then the version reads “To be stated from the recorded session”.
Production plan: Prepared for professional review
Enrolment, payment and downloads: Disabled

Video lesson: Not recorded — authentic professional recording required. The written lesson on this page is complete and can be read in full without a video, an account, enrolment or payment.

Authentic software screen capture only — non-negotiable standard

Applies to every software demonstrated in the Academy, including AutoCAD, QGIS, Revit, ArcGIS, SketchUp, Lumion, Civil 3D, Rhino and any other software used. The final video must accurately represent what a learner sees when using the stated software version.

Every demonstration is a genuine screen recording or screenshot captured from the actual installed software being taught.
The exact software name, version, operating system and relevant workspace are stated on screen and in the lesson notes, as read from the recorded session.
The real interface is shown: menus, panels, toolbars, properties, layer controls, settings and the command line or log.
The real cursor, tool selection, commands, settings and the resulting output are visible.
Capture is 16:9 and readable at 720p, with clear, unhurried cursor movement; the screen stays clear enough for learners to follow.
The view zooms in whenever text, settings, coordinates or field values would otherwise be hard to read.
The exact command, menu path or tool name is shown as it appears in the software.
Useful keyboard shortcuts are shown alongside the menu path, never instead of it.
Differences between software versions or operating systems are stated wherever the interface may display differently.
Steps are numbered on screen, with callouts pointing at the actual control being used.
Any annotation is added only after recording and must never alter or misrepresent the software interface.
Captions and a complete transcript are produced before professional review.
Any presenter window stays small, is positioned clear of technical content, and is hidden on mobile widths and on dense technical screens.

Interface visibility on every recording

The full application interface is shown at the beginning of every demonstration, with the application identity and exact version clearly visible.
The relevant menu bar, ribbon, toolbar or toolbox stays visible while each step is explained; the interface context is never cropped away.
Layers, properties, project browser or data panels are shown wherever applicable.
The command line, status bar or coordinate/CRS information is shown wherever relevant.
Real cursor movement and visible clicks are captured, with visible cursor highlighting or click indicators.
The selected tool and its effect are visible, and complete dialog boxes and settings are shown whenever one is opened.
The resulting drawing, map, model or output is shown in the recording.
Zoom is used only when necessary for small text or settings, always retaining enough context to identify the application and tool in use.
The standard applies to every software course and is verified before any video is marked recorded or approved; if the required authentic interface is not visible, the lesson remains “Video lesson: Not recorded — authentic professional recording required.”

Never used

Generic website mockups standing in for a software workspace.
Simulated, redrawn, reconstructed or redesigned replica interfaces for any software.
AI-generated software screens, panels, dialogs or map canvases.
Generic illustrations replacing the real interface.
Unverified screenshots taken from any source other than the recorded session.
Fake video players, placeholder thumbnails or invented durations.
Invented menus, tool names, command names, dialog options or keyboard shortcuts.
Hiding important controls or covering them with a presenter window.
Annotations that alter or misrepresent the recorded software interface.
Claiming or implying that a simulated screen is an authentic software demonstration.

QGIS — what the recording must show

Exact QGIS version to be stated from the recorded session. Operating system to be stated from the recorded session; menu positions and file dialogs differ between systems.

1.Project CRS: Project Properties, the CRS tab and the selected coordinate reference system.
2.Layer loading: the Data Source Manager or Browser panel and the layer added to the canvas.
3.Layer properties: the Layer Properties dialog and each tab used in the lesson.
4.Symbology: the Symbology tab with the real renderer, classes and colour settings.
5.Attribute tables: the attribute table, field values, selection and expression use.
6.Processing tools: the Processing Toolbox with the tool searched and opened by its real name.
7.Analysis settings: every parameter in the tool dialog, including output location.
8.Map layout: the Print Layout window, page setup and map item.
9.Legend, scale and north arrow: each item added from the real layout toolbar.
10.Export and quality checks: the export dialog settings and a check of the exported file.

No authentic software recording or screenshot exists yet. Every software lesson remains “Video lesson: Not recorded — authentic professional recording required.”

Real professional classroom experience — every lesson

Applies to every future Academy lesson, software-based or not. The finished lesson presents as authentic professional training, professionally narrated and screen-led: video + written guide + supporting data + practical task + quality checklist + final named deliverable.

Lesson structure

1.Professional introduction.
2.Realistic project situation.
3.Learner role within that situation.
4.Problem statement.
5.Learning objectives.
6.Required software and data.
7.Step-by-step demonstration.
8.Explanation of the professional reasoning behind each action.
9.Practical learner task.
10.Checkpoint or pause activity.
11.Common mistake and its correction.
12.Quality-control review.
13.Final recap.
14.Named learner deliverable.

Video requirements

Professional narration that is clear, natural and paced for instruction, synchronised with the screen action.
Authentic screen recording from the actual software, with visible menus, tools, panels, commands, settings and outputs.
Natural cursor movement and deliberate pacing, with a clear explanation of why each action is taken.
Realistic corrections and troubleshooting shown, not edited away.
Clear 16:9 screen capture.
Captions and a complete transcript.
Chapter titles and lesson sections.
A small presenter window only where useful; it never covers technical content and is hidden on mobile or dense technical screens.

Never produced as a lesson

Automated slideshows.
Generic screen tours.
Silent software demonstrations.
Marketing videos presented as lessons.
AI-avatar presentations.
Simulated software tutorials.
Fast montages without explanation.
An invented tutor, instructor identity, voice, recording, thumbnail or completion status.

Lessons use only synthetic, publicly licensed or Ideeplan-owned examples. No confidential client information is used.

No genuine professional recording exists yet. Until one does, every lesson remains “Video lesson: Not recorded — authentic professional recording required.” Enrolment, payments, certificates and protected learner access stay disabled during this production stage.

Professional narration and screen-first production

Every Academy lesson is planned as a professionally narrated, screen-led practical lesson with captions and a complete transcript.
No AI avatar, virtual presenter or artificial talking head is used, and no named person is imitated. No lesson is described as human-narrated, instructor-led by a named person or personally presented unless that is factually true.
No instructor identity is published until a real, named professional has recorded and approved the lesson.
Recordings are screen-first: the GIS view, planning drawing, AutoCAD or Revit workspace or document remains the main subject of the frame.
Any presenter picture-in-picture normally occupies about 8–10% of the frame, never covers technical content, and is reduced or hidden on small screens.
The Principal Consultant portrait is reserved for approved introductions and conclusions. It is never used as a repeated course thumbnail, and the Academy remains company-first.

No lesson has been recorded and no narration has been produced. Scripts exist as production plans only, and every lesson video status remains “Not recorded”.

Demonstration material is synthetic, publicly licensed or owned by Ideeplan Consult. No confidential client file, unauthorised agency dataset or private project information is used.

Methods are jurisdiction-neutral. Learners must confirm local laws, policies and technical standards before applying them to a real project.

A production plan describes how a lesson would be recorded. It is not a recording, and it does not create an enrolment, account, payment or reserved place.

9 lesson production plans · suggested recording time about 90 minutes in total (a planning estimate, not a recorded duration) · every lesson video status: Not recorded.

Lesson 1 · Video lesson: Not recorded — authentic professional recording required.
Sourcing and assessing network data
Learning objective
What open and authority network data does and does not contain, path completeness, private routes, and how to assess fitness for purpose before use.
Narration focus
Make the network trustworthy before measuring anything with it.
Screen action
Assess the teaching network and write a fitness-for-purpose note.
Required software
QGIS, Spreadsheet software
Example data
Synthetic road, path and crossing network with deliberate topology errors, plus a synthetic timetable extract.
Expected learner output
The note states known gaps and their effect on results.
Suggested length
About 8 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.What open and authority network data does and does not contain, path completeness, private routes, and how to assess fitness for purpose before use.
2. 2.Assess the teaching network and write a fitness-for-purpose note.
3. 3.The note states known gaps and their effect on results.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 2 · Video lesson: Not recorded — authentic professional recording required.
Topology cleaning and connectivity
Learning objective
Dangles, undershoots, unsnapped intersections, missing crossings, one-way handling, and why a single unsnapped node destroys a catchment.
Narration focus
Make the network trustworthy before measuring anything with it.
Screen action
Repair the seeded topology errors and record each correction.
Required software
QGIS, Spreadsheet software
Example data
Synthetic road, path and crossing network with deliberate topology errors, plus a synthetic timetable extract.
Expected learner output
A connectivity test returns a single routable network.
Suggested length
About 10 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.Dangles, undershoots, unsnapped intersections, missing crossings, one-way handling, and why a single unsnapped node destroys a catchment.
2. 2.Repair the seeded topology errors and record each correction.
3. 3.A connectivity test returns a single routable network.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 3 · Video lesson: Not recorded — authentic professional recording required.
Impedance, speeds and barriers
Learning objective
Setting walk and cycle speeds, slope and crossing delay, modelling severance from rivers, rail and arterial roads, and documenting every assumption.
Narration focus
Make the network trustworthy before measuring anything with it.
Screen action
Build the impedance field and a barrier layer with stated values.
Required software
QGIS, Spreadsheet software
Example data
Synthetic road, path and crossing network with deliberate topology errors, plus a synthetic timetable extract.
Expected learner output
Every impedance value has a written justification.
Suggested length
About 12 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.Setting walk and cycle speeds, slope and crossing delay, modelling severance from rivers, rail and arterial roads, and documenting every assumption.
2. 2.Build the impedance field and a barrier layer with stated values.
3. 3.Every impedance value has a written justification.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 4 · Video lesson: Not recorded — authentic professional recording required.
Walk and cycle isochrones
Learning objective
Service-area analysis, the difference between straight-line and network catchments, time bands that reflect real behaviour, and reporting population within each band.
Narration focus
Measure access along the network for each mode, honestly.
Screen action
Produce walk and cycle catchments to key services and compare them to buffers.
Required software
QGIS, Spreadsheet software
Example data
Synthetic service points, stop locations and frequency teaching data.
Expected learner output
The buffer-versus-network overstatement is quantified.
Suggested length
About 8 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.Service-area analysis, the difference between straight-line and network catchments, time bands that reflect real behaviour, and reporting population within each band.
2. 2.Produce walk and cycle catchments to key services and compare them to buffers.
3. 3.The buffer-versus-network overstatement is quantified.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 5 · Video lesson: Not recorded — authentic professional recording required.
Public transport access and frequency weighting
Learning objective
Access to stops, waiting and interchange penalties, weighting by frequency rather than presence, and why a stop with two services a day is not access.
Narration focus
Measure access along the network for each mode, honestly.
Screen action
Produce a frequency-weighted public transport accessibility surface for the area.
Required software
QGIS, Spreadsheet software
Example data
Synthetic service points, stop locations and frequency teaching data.
Expected learner output
Stops are weighted by service level, not by existence.
Suggested length
About 10 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.Access to stops, waiting and interchange penalties, weighting by frequency rather than presence, and why a stop with two services a day is not access.
2. 2.Produce a frequency-weighted public transport accessibility surface for the area.
3. 3.Stops are weighted by service level, not by existence.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 6 · Video lesson: Not recorded — authentic professional recording required.
Severance, crossings and network gaps
Learning objective
Measuring detour ratios, identifying missing links, valuing a new crossing, and mapping gaps as opportunities rather than as absences.
Narration focus
Measure access along the network for each mode, honestly.
Screen action
Calculate detour ratios and test the effect of one new crossing.
Required software
QGIS, Spreadsheet software
Example data
Synthetic service points, stop locations and frequency teaching data.
Expected learner output
The crossing test reports the change in population within each band.
Suggested length
About 12 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.Measuring detour ratios, identifying missing links, valuing a new crossing, and mapping gaps as opportunities rather than as absences.
2. 2.Calculate detour ratios and test the effect of one new crossing.
3. 3.The crossing test reports the change in population within each band.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 7 · Video lesson: Not recorded — authentic professional recording required.
Combining accessibility with land use and population
Learning objective
Overlaying accessibility with population and land use, identifying car-dependent locations, and expressing findings as planning-relevant statements.
Narration focus
Turn analysis into evidence that withstands scrutiny.
Screen action
Produce a car-dependency map with a supporting statistics table.
Required software
QGIS, Spreadsheet software
Example data
Synthetic population grid and land-use layer, plus Ideeplan-owned map templates.
Expected learner output
Every mapped conclusion has a number behind it.
Suggested length
About 8 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.Overlaying accessibility with population and land use, identifying car-dependent locations, and expressing findings as planning-relevant statements.
2. 2.Produce a car-dependency map with a supporting statistics table.
3. 3.Every mapped conclusion has a number behind it.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 8 · Video lesson: Not recorded — authentic professional recording required.
Map quality assurance
Learning objective
Classification honesty, colour choice, scale and projection statements, legend completeness, and the checks that catch a misleading map.
Narration focus
Turn analysis into evidence that withstands scrutiny.
Screen action
Run a QA pass on three maps and log every correction made.
Required software
QGIS, Spreadsheet software
Example data
Synthetic population grid and land-use layer, plus Ideeplan-owned map templates.
Expected learner output
Each map states projection, source, date basis and classification method.
Suggested length
About 10 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.Classification honesty, colour choice, scale and projection statements, legend completeness, and the checks that catch a misleading map.
2. 2.Run a QA pass on three maps and log every correction made.
3. 3.Each map states projection, source, date basis and classification method.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.
Lesson 9 · Video lesson: Not recorded — authentic professional recording required.
Writing a reproducible method statement
Learning objective
Recording inputs, parameters, processing sequence and limitations so a second analyst can reproduce the result and a challenger can test it.
Narration focus
Turn analysis into evidence that withstands scrutiny.
Screen action
Write the method statement and have a peer attempt a dry-run reproduction.
Required software
QGIS, Spreadsheet software
Example data
Synthetic population grid and land-use layer, plus Ideeplan-owned map templates.
Expected learner output
A peer can follow the statement without asking a question.
Suggested length
About 12 minutes (planning estimate)
Captions and transcript
Required before professional review
Narration
Professional narration — not yet produced
Demonstration sequence
1. 1.Recording inputs, parameters, processing sequence and limitations so a second analyst can reproduce the result and a challenger can test it.
2. 2.Write the method statement and have a peer attempt a dry-run reproduction.
3. 3.A peer can follow the statement without asking a question.
Quality review checklist
- Technical content (map, drawing, model or document) fills the majority of the frame and stays legible at 720p.
- Presenter picture-in-picture, if used, stays at roughly 8–10% of the frame, never covers legends, dimensions, labels or annotations, and is hidden on mobile widths and dense technical screens.
- Software shown is limited to QGIS, Spreadsheet software, with no suggestion of provider endorsement.
- Capture is a genuine screen recording from the real application — no mockup, simulated interface, AI-generated screen or unverified screenshot.
- The exact software name, version and, where relevant, operating system are read from the recorded session and stated on screen.
- Menus, panels, toolbars, layer controls and the command line or log are visible and legible; the view zooms in wherever text, settings or coordinates would be hard to read.
- The full application interface is shown at the beginning; menus, tools and panels stay visible throughout and the interface context is never cropped away, with zoom retaining enough context to identify the application and tool.
- Real cursor movement with visible highlighting or click indicators is captured; the selected tool, its effect, complete dialogs and the resulting output are all shown.
- The exact command, menu path or tool name is shown as it appears in the software, with useful keyboard shortcuts alongside it and alternative locations explained for other versions.
- Numbered on-screen steps and callouts point at the real controls being used; no menu, tool or command is invented.
- Until an authentic recording exists the lesson reads: “Video lesson: Not recorded — authentic professional recording required.”
- All data on screen is synthetic, publicly licensed or Ideeplan-owned, and is labelled as demonstration data.
- Narration states that methods are jurisdiction-neutral and that local laws, policies and standards must be confirmed.
- Captions and a transcript are produced before the recording can move to professional review.
- No client name, confidential file or private project information appears on screen at any point.

Course production standard

Recordings are screen-first: the planning drawing, GIS view, AutoCAD or Revit workspace stays the main subject of the frame.
Any presenter picture-in-picture normally occupies no more than about 8–10% of the frame and never covers maps, legends, drawings, dimensions or annotations.
On mobile and on dense technical screens the presenter window is reduced further or hidden entirely.
The Principal Consultant portrait is reserved for approved introductions, explanations and conclusions. It is not used as a generic thumbnail for every course.
Narration is planned for professional human delivery. No AI narration, AI presenter or recorded lesson exists today.

No lesson has been recorded. Every lesson media status is “Not recorded”.

Any example data used in teaching is synthetic, publicly licensed or owned by Ideeplan Consult, and is clearly labelled as demonstration data. No client file, confidential document or unauthorised project material is used.

Want this course finished first?

Registering interest is not an enrolment. It tells Ideeplan Consult which subjects to complete and review first.

Discuss a Project

GIS for Transport Accessibility and Network Analysis

Written teaching content: available for review

Written course content

Client-style brief

Professional scenario

Planning problem

Learning objectives

Modules and lessons

Module 1 — Network data and topology

Sourcing and assessing network data

Topology cleaning and connectivity

Impedance, speeds and barriers

Module 2 — Accessibility analysis

Walk and cycle isochrones

Public transport access and frequency weighting

Severance, crossings and network gaps

Module 3 — Evidence, cartography and reproducibility

Combining accessibility with land use and population

Map quality assurance

Writing a reproducible method statement